Friday, January 16, 2009

Sudoku techniques

Sudoku grid consists of 81 squares divided into nine columns marked a through i, and nine rows marked 1 through 9. The grid is also divided into nine 3x3 sub-grids named boxes which are marked box 1 through box 9. Sudoku Grid

Scanning techniques

The easiest way starting a Sudoku puzzle is to scan rows and columns within each triple-box area, eliminating numbers or squares and finding situations where only a single number can fit into a single square. The scanning technique is fast and usually sufficient to solve easy puzzles all the way to the end. The scanning technique is also very useful for hard puzzles up to the point where no further progress can be made and more advanced solving techniques are required. Here are some ways of using scanning techniques:

1. Scanning in one direction:

In our first example we will focus on box 2, which like any other box in Sudoku must contain 9. Looking at box 1 and box 3 we can see there are already 9s in row 2 and in row 3, which excludes the two bottom rows of box 2 from having 9. This leaves square e1 as the only possible place into which 9 can fit in.

Scanning in one direction A Scanning in one direction B

2. Scanning in two directions:

The same technique can be expanded by using information from perpendicular rows and columns. Let’s see where we can place 1 in box 3. In this example, row 1 and row 2 contain 1s, which leaves two empty squares in the bottom of box 3. However, square g4 also contains 1, so no additional 1 is allowed in column g. This means that square i3 is the only place left for 1.

Scanning in two directions A Scanning in two directions B

3. Searching for Single Candidates:

Often only one number can be in a square because the remaining eight are already used in the relevant row, column and box. Taking a careful look at square b4 we can see that 3, 4, 7 and 8 are already used in the same box, 1 and 6 are used in the same row, and 5 and 9 are used in the same column. Eliminating all the above numbers leaves 2 as the single candidate for square b4.

Searching for Single Candidates A Searching for Single Candidates B

4. Eliminating numbers from rows, columns and boxes:

There are more complex ways to find numbers by using the process of elimination. In this example the 1 in square c8 implies that either square e7 or square e9 must contain 1. Whichever the case may be, the 1 of column e is in box 8 and it is therefore not possible to have 1 in the centre column of box 2. So the only square left for 1 in box 2 is square d2.

Eliminating numbers from rows, columns and boxes A Eliminating numbers from rows, columns and boxes B

5. Searching for missing numbers in rows and columns:

This method can be particularly useful when rows (and columns) are close to completion. Let’s take a look at row 6. Seven of the nine squares contain the numbers 1, 2, 3, 4, 5, 8 and 9, which means that 6 and 7 are missing. However, 6 cannot be in square h6 because there is already 6 in that column. Therefore the 6 must be in square b6.

Searching for missing numbers in rows and columns A Searching for missing numbers in rows and columns B

Analyzing techniques

As Sudoku puzzle levels get harder you will find the simple scanning methods described above are not enough and more sophisticated solving techniques must be used. Hard puzzles require deeper logic analysis which is done with the aid of pencilmarks. Sudoku pencilmarking is a systematic process writing small numbers inside the squares to denote which ones may fit in. After pencilmarking the puzzle, the solver must analyze the results, identify special number combinations and deduce which numbers should be placed where. Here are some ways of using analyzing techniques:

1. Eliminating squares using Naked Pairs in a box:

In this example, squares c7 and c8 in box 7 can only contain 4 and 9 as shown with the red pencilmarks below. We don’t know which is which, but we do know that both squares are occupied. In addition, square a6 excludes 6 from being in the left column of box 7. As a result the 6 can only be in square b9. Such cases where the same pair can only be placed in two boxes is called Disjoint Subsets, and if the Disjoint Subsets are easy to see then they are called Naked Pairs.

Eliminating squares using Naked Pairs in a box A Eliminating squares using Naked Pairs in a box B

2. Eliminating squares using Naked Pairs in rows and columns:

The previous solving technique is useful for deducing a number within a row or column instead of a box. In this example we see that squares d9 and f9 in box 8 can only contain 2 and 7. Again we don’t know which is which, but we do know that both squares are occupied. The numbers which remain to be placed in row 9 are 1, 6 and 8. However, 6 can’t be placed in square a9 or in square i9, so the only possible place is square c9.

Eliminating squares using Naked Pairs in rows and columns A Eliminating squares using Naked Pairs in rows and columns B

3. Eliminating squares using Hidden Pairs in rows and columns:

Disjoint Subsets are not always obvious to see at first sight, in which case they are called Hidden Pairs. If we take a very close look at the pencilmarks in row 7 we can see that both 1 and 4 can only be in square f7 and square g7. This means that 1 and 4 are a Hidden Pair, and that square f7 and square g7 cannot contain any other number. Using the scanning technique we see that 7 can only be in square d7.

Eliminating squares using Hidden Pairs in rows and columns A Eliminating squares using Hidden Pairs in rows and columns B

4. Eliminating squares using X-Wing:

The X-Wing technique is used in rare situations which occur in some extremely difficult puzzles. Scanning column a we see that 4 can only be in square a2 or square a9. Similarly, 4 can only be in square i2 or square i9. Because of the X-Wing pattern where boxes are in the same row (or column), a new logic constraint occurs: it is obvious that in row 2 the 4 can only be either in square a2 or in square i2, and it cannot be in any other square. Therefore 4 is excluded from square c2, and square c2 must be 2.

Eliminating squares using X-Wing A Eliminating squares using X-Wing B

Jumbo Hostel

History and curiosities

– This is the budget price alternative Arlanda has needed for quite a long time and also a new landmark at Arlanda offering a unique experience for the guests, says hostel owner and the man behind Jumbo Hostel, Oscar Diös.

Oscar Diös previously owns and operates the hostel Uppsala Vandrarhem och Hotell.

– I was getting ready to expand my hostel business in 2006 when I heard about an old wreck of an aircraft for sale at Arlanda. Since I had for a long time wanted to establish my business at Arlanda I didn’t hesitate for a second when this opportunity struck, Oscar Diös explains.

The airplane, a decommissioned model 747-200 jumbo jet built in 1976, was last operated by Transjet, a Swedish airline that went bankrupt in 2002. It was originally built for Singapore Airlines and later served with legendary Pan Am.

In December 2007, Sigtuna authorities granted a building permit for establishing Jumbo Hostel at the entrance to Arlanda airport. In January 2008, the aircraft was moved to a construction site parking where the first phase of the conversion has begun with the dismantling of the old interior, new paint and new decorations for the rooms. 450 seats are taken out and the plane is sanitized in its entirety. The hostel is built like any house, subjected to the same demands on climate control and isolation. It adheres to all common energy standards. Heating is achieved with an air-air inverter.

Summer 2008 the plane was towed to its final destination at the entrance to Arlanda where it was placed on a concrete foundation with the landing gear secured in two steel cradles. Here, Jumbo Hostel are a spectacular landmark as a portal to Arlanda offering a view of the landing strip. No visitor to Arlanda will miss the new hostel!

Tuesday, January 13, 2009


Elevate the experience with the Washlet® S400. It’s the first Washlet seat that combines the convenience of a hands-free flush with an automatic open & close lid.

The Washlet S400, designed to work exclusively with select TOTO toilets, is our first intuitive Washlet. Experience the ultimate in clean comfort with an automatic, hands-free flushing system and a sensor-activated lid that automatically lifts as you approach the toilet and lowers as you walk away. A convenient, easy-to-use remote control affords you effortless operation of our most luxurious Washlet model to date. The S400 offers the following features:

  • Auto Flush Activated by Sensors or the Simple Touch of a Button
  • Automatic Open / Close Lid Activated by Sensors, or the Simple Touch of a Button on the Remote Control
  • Gentle Aerated Warm Water
  • Front and Rear Washing
  • Massage Feature
  • Warm Air Drying with Variable Three-Temperature Setting
  • Automatic Air Purifier
  • Heated Seat with Temperature Control
  • Convenient Wireless Remote Control with Large LCD Panel
  • Docking Station for Easy Cleaning & Installation
  • Cleaner, Sleeker Look
  • Reinforced Base Plate for Enhanced Durability

How does the Washlet work?

The Washlet is designed to introduce you to a level unprecedented comfort, while delivering on the promise of maximum cleanliness. At your command, an integrated, self-cleaning nozzle extends to release a warm, soothing stream of aerated water to provide the ultimate in personal cleansing.

Automatic Open / Close Lid
Front and Rear Washing
Warm Air Dryer
Heated Seat
Self-Cleaning Wand